Belt, Serpentine: Installation: 6.2L

CAUTION:

Do not let tensioner arm snap back to the freearm position, sever damage may occur to the tensioner.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

When installing accessory drive belt onto pulleys, make sure that belt is properly routed and all V-grooves make proper contact with pulleys.

Position the serpentine belt (1) over all pulleys except for the water pump pulley.
Rotate the tensioner (2) clockwise and slip the serpentine belt (1) over the water pump pulley.
Gently release the belt tensioner (2).