LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cooling System >> Transmission >> Tubes And Hoses, Transmission Oil Cooler >> Installation

Tubes And Hoses, Transmission Oil Cooler: Installation

  1. Install rear transmission cooler lines at transmission. Tighten fittings to 20 N.m (18 ft. lbs.).
  2. Install rear transmission cooler lines to thermal bypass valve. Tighten fittings to 20 N.m (18 ft. lbs.).
  3. Install front transmission cooler lines to thermal bypass valve. Tighten fittings to 20 N.m (18 ft. lbs.).
  4. Install front transmission cooler lines into transmission cooler. Refer to STANDARD PROCEDURE .
  5. Lower vehicle.
  6. Check transmission fluid level. Refer to FLUID AND FILTER, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals