Tube, Fuel Tank Filler: Removal

Perform the fuel tank draining procedure. Refer to DRAINING FUEL TANK .
Disconnect the negative battery cable.

Courtesy of CHRYSLER GROUP, LLC
Open the fuel filler door.
Remove the fuel filler cap.
Remove the left rear wheelhouse splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Using your hand. Remove the fuel filler tube housing by squeezing the locking tabs located on the backside of the fender.
Remove the housing away from the fender allowing the filler tube to release from the rubber grommet.

Courtesy of CHRYSLER GROUP, LLC
Disconnect the Onboard Refueling Vapor Recovery (ORVR) line (3) at the filler tube. Refer to FITTING, QUICK CONNECT, STANDARD PROCEDURE .
Remove the fuel filler tube retaining nut (5).

Courtesy of CHRYSLER GROUP, LLC

NOTE:
The filler tube connecting hose to the fuel tank is pressure fitted to the filler tube. To remove the hose. It must be removed from the fuel tank side.
Loosen the fuel filler tube hose clamp from the fuel tank.

Courtesy of CHRYSLER GROUP, LLC
Remove the fuel filler tube rubber hose from the fuel tank and remove the fuel filler tube from the vehicle.