Sensor, Charge Air Cooler Temperature: Removal
The charge air cooler temperature sensor on the 6.2L engine is located on the right side of the coolant crossover manifold on the supercharger.
WARNING:
Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the coolant temperature sensor.
- Disconnect and isolate the negative battery cable.
- Partially drain the cooling system. Refer to STANDARD PROCEDURE .
- Remove the cowl panel cover. Refer to COVER, COWL PANEL, REMOVAL .
- Disconnect the charge air cooler temperature sensor wire harness connector (1).
- Remove the charge air cooler temperature sensor (2) from the supercharger.