LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Transmission >> Valve, THERMO Bypass >> Installation

Valve, THERMO Bypass: Installation

GC0079920Courtesy of CHRYSLER GROUP, LLC
1 - BRACKET BOLT
2 - THERMAL BYPASS VALVE
3 - COOLER LINE
  1. Position the thermal bypass valve (2) in place and install the bracket bolt (1). Tighten the bracket bolt to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  2. Install the rear transmission cooler lines (3) in the thermal bypass valve. Tighten the transmission cooler lines to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  3. Install front transmission cooler lines in thermal bypass valve. Tighten the transmission cooler lines to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  4. Check the transmission fluid level. Refer to CAPACITIES AND RECOMMENDED FLUIDS, SPECIFICATIONS .
scientia non olet · About LEMON Manuals