LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Starter >> Installation >> 6.2L

Starting System (Service Information): Starter: Installation: 6.2L

  1. Position the starter into the transmission but do not install bolts.
  2. Connect the solenoid wire to the starter motor (snaps on).
  3. Position the battery cable to the solenoid stud. Install the battery cable eyelet nut and tighten to the proper specification Refer to: TORQUE SPECIFICATIONS .
  4. Install the mounting bolts (1) and tighten to the proper specification Refer to: TORQUE SPECIFICATIONS 
    G00582353Courtesy of CHRYSLER GROUP, LLC
  5. Install the RH catalytic converter. Refer to: 6.2L/6.4L
  6. Position the heat shield and install the two shield mounting nuts (1) and tighten to the proper specification. Refer to: TORQUE SPECIFICATIONS 
    G00582352Courtesy of CHRYSLER GROUP, LLC
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals