LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Suspension & Wheel Alignment >> Front >> Sensor, Active Damping >> Removal >> Front

Sensor, Active Damping: Removal: Front

NOTE:

Removal process is the same for both sides of the vehicle.

GC0170152Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Release the terminal locking tab and disconnect the wiring harness connector (1).
  3. Remove the front Active Damping System (ADS) sensor bolt (3) and sensor (2) from the vehicle.
scientia non olet · About LEMON Manuals