LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Base Brakes (Service Information) >> Hydraulic/Mechanical >> Rotor, Brake >> Removal >> Front-Non SRT

Front-Non SRT

NOTE:

Before proceeding, Refer to WARNING  and CAUTION 

NOTE:

Removal process is the same for both sides of the vehicle.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL .
    GC0170076Courtesy of CHRYSLER GROUP, LLC
  3. Remove the two brake caliper adapter to knuckle bolts (1).
    NOTE:

    The bolts (1) are one time use and need to be discarded.

  4. Remove the brake caliper (6) and adapter (3) as an assembly and position aside.
    GC0170444Courtesy of CHRYSLER GROUP, LLC
  5. Remove any clips retaining brake rotor (2) to wheel studs.
  6. Slide brake rotor (2) off the hub (3).
scientia non olet · About LEMON Manuals