LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Base Brakes (Service Information) >> Hydraulic/Mechanical >> Rotor, Brake >> Removal >> Rear-SRT8

Rotor, Brake: Removal: Rear-SRT8

NOTE:

Before proceeding, Refer to CAUTION  and WARNING .

NOTE:

Removal process is the same for both sides of the vehicle.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL .
    GC0095165Courtesy of CHRYSLER GROUP, LLC
  3. Support spring link (1) using a transmission jack (5) or other appropriate jack. Raise spring link just enough to access brake caliper lower mounting bolt (4) from above compression link (2).
    GC0170404Courtesy of CHRYSLER GROUP, LLC
  4. Remove the brake caliper to knuckle bolts (3).
  5. Remove the brake caliper assembly (2) from the knuckle and position aside.
    GC0170476Courtesy of CHRYSLER GROUP, LLC
  6. Remove any clips retaining brake rotor (1) to hub.
  7. Slide brake rotor (1) off the hub (3).
scientia non olet · About LEMON Manuals