60% Seat Back

Courtesy of CHRYSLER GROUP, LLC

NOTE:

There is a hole (5) in the foam next to each molded clip (6) to aid in clip strip installation.

Position the seat back cover (1) onto the seat back foam (3), starting at the top, and fasten the hook loop fasteners (4).
Align the clip strips (2) to the molded clips.
NOTE:
Note that there is a hole in the foam, next to each molded clip, to aid in clip strip alignment/installation.

Courtesy of CHRYSLER GROUP, LLC
Press the clip strip (2) into each molded clip (1).

Courtesy of CHRYSLER GROUP, LLC
Position the seat back assembly (2) onto the seat back frame (1) and install the push fastener (3).
Route the seat back latch strap through the sleeve in the seat back cover.

Courtesy of CHRYSLER GROUP, LLC
Fasten the hook and loop fastener (1) at the center hinge bracket (2).

Courtesy of CHRYSLER GROUP, LLC
Fasten the retainer strip (2) at the bottom of the seat back cover (3).
Close the zippers (1) on both sides of the seat back and tuck the zipper up into the seat back cover.

Courtesy of CHRYSLER GROUP, LLC
Install the headrest sleeves (2) into the seat back.

Courtesy of CHRYSLER GROUP, LLC
Install the five push fasteners (1) in the armrest pocket.

Courtesy of CHRYSLER GROUP, LLC
Fasten the hook and loop fasteners (2) in the armrest pocket (1).
Install the headrest.
Install the rear seat back into the vehicle. Refer to SEAT BACK, REAR, INSTALLATION .