DECKLID/Hatch/Liftgate/Tailgate/Swing Gate: DECKLID: Installation

Courtesy of CHRYSLER GROUP, LLC

With aid of an assistant holding the decklid (3), position the decklid and loosely install the bolts (2).
Align the decklid hinge (1) with the reference mark made previously and tighten the decklid hinge to decklid bolts to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
Clip the wire harness (4) to the decklid and connect all harness connectors.
Connect the negative battery cable.
Verify fit of decklid and adjust if necessary. Refer to GAP AND FLUSH, SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Position the decklid trim cover (3) and install the push fasteners (4).
NOTE:
The manual trunk release handle must be routed through the deck trim cover.
Install the pull handle (2).

Courtesy of CHRYSLER GROUP, LLC
Position the hinge cover (2) and install the push fasteners (1).