Door - Front: Door: Adjustments: In/Out
NOTE:
In/out door adjustment is done by loosening the hinge to door fasteners one hinge at a time and moving the door to the correct position.
- Support the front door with a suitable lifting device.
- Loosen the two bolts (2) that secure the striker (1) to the B-pillar.
- Loosen the four nuts (1 and 3) that secure the door hinges to the front door.
- Adjust the front door to the correct position. Refer to GAP AND FLUSH, SPECIFICATIONS .
- Tighten the nuts (2 and 3) that secure the door hinges (1 and 4) to the front door to 25 N.m (18 ft. lbs.) using the following sequence.
- Tighten the upper nut on the upper hinge (1).
- Tighten the lower nut on the lower hinge (4)
- Tighten the remaining hinge nuts.
NOTE:Make sure the protrusion (3) is orientated towards the interior of the vehicle.
- Tighten the two bolts (2) that secure the striker (1) to the B-pillar to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
