Telematics Mirror

Courtesy of CHRYSLER GROUP, LLC

Place the rear view mirror (1) onto the mirror button.
Grasp the mirror by the base and rotate it approximately 90 degrees counter-clockwise until the mirror locks into place.
NOTE:
The mirror must be fully seated onto the button before rotating.
Connect the wire harness connector (2).

Courtesy of CHRYSLER GROUP, LLC
Install the lower mirror trim (1) from the bottom. Make sure the tabs (2) engage fully.

Courtesy of CHRYSLER GROUP, LLC
Insert the bottom of the upper mirror trim (1) and rotate upward to engage the tabs (2).