Latch, Door: Removal
NOTE:
Front door latch shown in illustration, rear door similar.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the rear door carrier plate. Refer to PLATE, CARRIER, REMOVAL .
- Disconnect the electrical connector (2).
- Release the latch cover tabs (3) and remove the latch cover (1).
- Disconnect handle and lock cables (1) and remove the latch assembly (2).
NOTE:
Front door latch shown in illustration, rear door latch similar.

