Latch, Hood: Installation
- Install the hood latch release cable (3) into the hood latch (2).
- Position the hood latch and loosely install the bolts (5).
- Align the hood latch with the reference mark made previously and tighten the hood latch bolts to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Connect the wire harness connector (1) and clip the wire harness (4) in place.
- Verify proper hood latch operation and fit of hood. Adjust if necessary. Refer to GAP AND FLUSH, SPECIFICATIONS .
- Install the under hood appearance panel (1).
