Cover, Seat Cushion, Rear: Installation
- Position the seat cushion cover (1) onto the seat cushion foam (5) and align the clip strips (2) to the molded clips (3).NOTE:
Note that there is a hole in the foam, next to each molded clip, to aid in clip strip alignment/installation.
- Press the clip strip (2) into each molded clip (1).
- Position the seat cushion frame (2) and install new hog rings (3).
- Secure all the J-hook retainers (1) to the seat cushion frame.
- Install the rear seat cushion. Refer to SEAT CUSHION, INSTALLATION .
