Door - Front: Door: Adjustments: Up/Down

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Up/down door adjustment is done by loosening either the hinge to the body fasteners or the hinge to door fasteners and moving the door to the correct position.

Support the front door with a suitable lifting device.
Loosen the two bolts (2) that secure the striker (1) to the B-pillar.

Courtesy of CHRYSLER GROUP, LLC
If necessary, loosen the nuts (1 and 3) that secure the door hinges to the front door.

Courtesy of CHRYSLER GROUP, LLC
If necessary, loosen the bolts (2 and 3) that secure the front door hinges (1 and 4) to the A-pillar.

Courtesy of CHRYSLER GROUP, LLC
Adjust the front door to the correct position. Refer to GAP AND FLUSH, SPECIFICATIONS .
Tighten the nuts that secure the door hinges to the front door to the proper torque specifications using the following sequence. Refer to TORQUE SPECIFICATIONS .
1. Tighten the upper nut on the lower hinge.
2. Tighten the lower nut on the upper hinge.
3. Tighten the lower nut on the lower hinge.
4. Tighten the upper nut on the upper hinge.
Courtesy of CHRYSLER GROUP, LLC

NOTE:
Make sure the protrusion (3) is orientated towards the interior of the vehicle.
Tighten the two bolts (2) that secure the striker (1) to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .