LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Horns >> Horn System (Service Information) >> Relay, Horn >> Installation

Relay, Horn: Installation

GC0144702Courtesy of CHRYSLER GROUP, LLC
  1. Refer to the fuse and relay layout map on the underside of the front Power Distribution Center (PDC) cover for the proper horn relay identification and cavity location.
  2. Position the horn relay in the proper cavity within the front PDC.
  3. Align the relay terminals with the terminal cavities in the PDC.
  4. Push firmly and evenly on the top of the relay until the terminals are fully seated in the terminal cavities in the PDC.
  5. Install the cover onto the front PDC.
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals