Panel, B-Pillar Trim: Installation
- Route the seat belt through the B-pillar trim panel (1).
- Align the seat belt height adjuster bezel and position the upper B-pillar trim panel onto the body. Hand tap to engage the retaining clips.NOTE:
Move the seat belt height adjuster up and down to check that it works properly. If is does not work properly, remove the B-pillar trim and align the seat belt height adjuster bezel.
- Using a trim stick (1) or equivalent, carefully lift the headliner (2) and install the hidden screw (3) at the top of the B-pillar (4). Tighten the screw securely.
- Install the door opening weatherstrip.
- Install the cowl side trim (1) at the front, then hand tap the rear to install the retaining clips.
- Install the front edge of the rear door sill.
- Reposition front seat.
