Cover, Seat Cushion, Rear: Installation

Courtesy of CHRYSLER GROUP, LLC

Position the seat cushion cover (1) onto the seat cushion foam (5) and align the clip strips (2) to the molded clips (3).
NOTE:
Note that there is a hole in the foam, next to each molded clip, to aid in clip strip alignment/installation.

Courtesy of CHRYSLER GROUP, LLC
Press the clip strip (2) into each molded clip (1).

Courtesy of CHRYSLER GROUP, LLC
Position the seat cushion frame (2) and install new hog rings (3).
Secure all the J-hook retainers (1) to the seat cushion frame.
Install the rear seat cushion. Refer to SEAT CUSHION, INSTALLATION .