Display, Radio: Installation
- Position the radio display near the radio mounting location of the instrument panel.
- Connect the four wire harness connectors (1) to the back of the radio display.
- Position the radio display into the mounting location of the instrument panel support structure.
- Install and tighten the six screws (1) that secure the radio to the instrument panel support structure. Tighten the screws securely.
- Install the instrument cluster bezel onto the instrument panel. Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
- Connect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.
