LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Audio/Video/Entertainment/Connectivity (Service Information) >> Display, Radio >> Removal

Display, Radio: Removal

  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the instrument cluster bezel from the instrument panel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
    GC0173401Courtesy of CHRYSLER GROUP, LLC
  3. Remove the six screws (1) that secure the radio display (2) to the instrument panel support structure.
  4. Pull the radio display (2) out from the instrument panel far enough to access the connections at the back of the radio.
    GC0173366Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the 4 wire harness connectors (1) from the back of the radio display.
  6. Remove the radio display from the instrument panel.
scientia non olet · About LEMON Manuals