LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Removal >> Front Door Panel

Front Door Panel

GC0144687Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the trim panel from the inside of the front door. Refer to PANEL, DOOR TRIM, REMOVAL .
  3. Remove the four screws (1) that secure the speaker (2) to the front door hardware module carrier.
    NOTE:

    Support the speaker while disconnecting the wire harness connector. Do not let the speaker hang from the wire harness.

  4. Pull the speaker away from the door far enough to access and disconnect the wire harness connector from the speaker.
  5. Remove the speaker from the front door.
scientia non olet · About LEMON Manuals