Spacer - Shelf Panel Subwoofer

Courtesy of CHRYSLER GROUP, LLC

NOTE:

This spacer is used only for vehicles equipped with a 25.4 centimeter (10 inch) diameter subwoofer mounted on the package shelf panel. The spacer is mounted between the package shelf panel and the subwoofer.

Position the spacer (2) onto the shelf panel support.
Install and tighten the four screws (1) that secure the spacer to the shelf panel. Tighten the screws securely.
Install the subwoofer onto the spacer on the package shelf panel. Refer to SPEAKER, INSTALLATION .
Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.