Module, Radio Antenna: Installation: Capacitor
- Engage the mounting tab of the antenna capacitor (5) into the slotted hole in the upper right C-pillar (1).
- Install and tighten the screw (6) that secures the antenna capacitor to the C-pillar. Tighten the screw securely.
- Reconnect the body wire harness connector (4) to the antenna capacitor.
- Reinstall the trim onto the upper right C-pillar. Refer to PANEL, C-PILLAR TRIM, INSTALLATION .
- Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.