LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Removal >> Instrument Panel

Instrument Panel

GC0170256Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the defroster grille from the top of the instrument panel. Refer to GRILLE, DEFROSTER, REMOVAL .
  3. Remove the two screws (3) that secure the speaker (2) to the top of the instrument panel support structure (1).
  4. Pull the speaker out of the instrument panel far enough to access and disconnect the wire harness connector from the speaker.
  5. Remove the speaker from the instrument panel.