LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Installation >> Rear Door Panel

Rear Door Panel

GC0144701Courtesy of CHRYSLER GROUP, LLC
  1. Support the speaker (2) while reconnecting the wire harness connector to the speaker. Do not let the speaker hang from the wire harness.
  2. Position the speaker to the inside of the rear door.
  3. Install and tighten the two screws (1) that secure the speaker to the inside of the rear door. Tighten the screws securely.
  4. Reinstall the trim panel onto the inside of the rear door. Refer to PANEL, REAR DOOR TRIM, POLICE, INSTALLATION .
  5. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.
scientia non olet · About LEMON Manuals