Subwoofer - Shelf Panel
- Position the subwoofer (5) near the mounting hole in the package shelf panel support.
- Reconnect the wire harness connector(s) (6) to the subwoofer.
- Position the subwoofer into the mounting hole of the shelf panel support.
- Install and tighten the four (20.32 centimeter/8 inch diameter subwoofer) or six (25.4 centimeter/10 inch diameter subwoofer) screws (4) that secure the subwoofer to the shelf panel support. Tighten the screws securely.
- Reinstall the trim onto the shelf panel support. Refer to PANEL, REAR SHELF, INSTALLATION .
- Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.