Deck Lid
- Disconnect and isolate the battery negative cable.
- Remove the Center High Mounted Stop Lamp (CHMSL) unit from the deck lid. Refer to LAMP, CENTER HIGH MOUNTED STOP, REMOVAL
.
- Disengage the deck lid release switch connector (1) and pigtail wire harness from the retention features on the back of the CHMSL housing.
- Firmly grasp the tabs of the deck lid release switch mounting flange (2) on the back of the CHMSL housing and rotate it counterclockwise about 30 degrees to unlock it.
- Pull the switch straight out from the clearance hole through the back of the CHMSL housing.
