Fender, Front: Installation
- Position the fender to the vehicle.
- Install the fasteners (1) securing the inner fender ledge and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Install the rear upper fastener (1) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Raise and support the vehicle.
- Install the two bolts (1) securing the lower fender dogleg to the sill and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Install the sill cladding, Refer to CLADDING, BODY, INSTALLATION .
- Accessing through the wheelhouse, install the fastener (1) securing the fender's rear fender bracket to the body side bracket and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Install the two fasteners (1) securing the fender's front tab to the front end module and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION .
- Check the fender for proper gap and flushness. Refer to GAP AND FLUSH, SPECIFICATIONS .
- Install the front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
- Install the hood hinge. Refer to HINGE, HOOD, INSTALLATION .
- Install the front wheel.
- Lower the vehicle.
- Connect the negative battery cable.
