LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System >> Pump >> Hose, Power Steering, Return >> Installation >> Cooler To Reservoir - 6.2L

Cooler To Reservoir - 6.2L

GC0170514Courtesy of CHRYSLER GROUP, LLC
  1. Install the power steering return hose (3) to the cooling module (2) and tighten the clamp (4).
    GC0170527Courtesy of CHRYSLER GROUP, LLC
  2. Route hose through engine compartment.
  3. Install the power steering return hose (1) onto reservoir (3) and tighten the clamp.
  4. Install upper radiator closure panels.
  5. Install the air cleaner. For 3.6L, refer to BODY, AIR CLEANER, INSTALLATION . For 5.7L, refer to BODY, AIR CLEANER, INSTALLATION . For 6.2L, refer to BODY, AIR CLEANER, INSTALLATION . For 6.4L, refer to BODY, AIR CLEANER, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  7. Fill and bleed power steering system. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals